fredag, november 16th, 2018

Enameled Wire is a Must for Cars

Electric motors usually convert electrical energy into mechanical motion through the interaction of a magnetic field and a current-carrying conductor. Motors exist in many different applications, such as fans, blowers, pumps, machines, household appliances, power tools and disk drives. The largest motor rated at thousands of kilowatts is used in the propulsion of large ships and other applications. The smallest motor can move the dial in an electric watch.

The motor contains copper enameled wire to generate the desired magnetic field. For a given size frame, the high conductivity material reduces the energy loss due to coil resistance. Poor conductors produce more waste heat when they convert electrical energy into kinetic energy.

Due to its high conductivity, copper is commonly used for coil winding, bearing, collector, brush and motor connectors, including the highest quality motor. Copper has higher conductivity compared with other materials, which can improve the electric energy efficiency of the motor. For example, to reduce the load loss of continuous induction motors over 1 HP, manufacturers always use copper as the conductive material in the windings. Aluminum is a substitute for motors with smaller horsepower, especially when used discontinuously.

One of the design elements of a quality motor is to reduce heat loss due to conductor resistance. In order to improve the power efficiency of induction motor, the load loss can be reduced by increasing the cross section of copper coil. The amount of copper in stator winding is 20% higher than that in standard winding.

The early development of motor efficiency focuses on reducing electrical losses by increasing the filling weight of stator windings. This makes sense because electricity losses typically account for more than half of all energy losses, and stator losses account for about two-thirds of electricity losses. However, there are disadvantages in improving the electric efficiency of the motor through large Enameled Wire . This increases the size and cost of the motor, which may not be desirable in applications such as appliances and cars.

onsdag, november 14th, 2018

Enameled Wire Manufacturer Xinyu Provides Quality Service

Xinyu-enameledwire is specialized in manufacturing of Enameled Wire for many years. We can product Enameled Copper Wire and enameled aluminum wire. High skilled staffs and technical engineers have been dedicated to enameled wire techniques since our company was founded.

Properties of Xinyu Enameled Wire

Enameled wires have excellent resistance to heat. That’s why they are used in making electric coils.

They are also resistant to heat shock.

They are also resistant to wearing and tearing.

They offer especially magnificent resistance to refrigerant materials.

They are smooth, hard, and durable.

They are chemically resistant, and cannot burn.

Main Applications of Xinyu Enameled Wire:

Small transformers, linear motors, relays, solenoids, small motors, clock coils, watch coils, magnetic heads.

Automotive sensors and coils as relais and ignition coils.

Generators, dry-type or oil-immersed

Anti-explosion motor, air-conditioner compressor, washing machines.

Military and space applications

Xinyu-enameledwire offer good after-sale service, many yeras production experience, perfect set of test equipment, fast and on-time delivery, so we own more and more customers.

We are keen on building long-term solid relationship with all serious buyers, with sincerity, we welcome you to visit our site xinyu-enameledwire and patrons.

mandag, november 12th, 2018

Introduction of UL Xinyu 200 Enamelled Copper Wire

Xinyu 200 Enameled Copper Wire Characteristic: The product can work continuously under 200C and 220C.lt has excellent properties of heat resistance,resistence to refrigerators,chemical and radiation.lt is suitable for the motors of compressors and air-conditioners and rolling mill motor working in adverse and high-quality power tools and light fitting and special power tools of aerospace,nuclear industry,steel-smelting and coal cutting and canned motor pump and automotive motor,etc.

Standard in accordance with : IEC 60317-13

Advantages Of Xinyu Copper Enameled Wire:

A) Stable quality, high-purity copper conductor adopted.

B) The most competitive price for your market.

C) Professional technology support and timely after-sale service.

D) Free sample available for your test.

E) Special specification can be customized, OEM is also accepted.

F) Fast Delivery, 12-15 days for one 20GP container’s loading.

G) Elantas insulation available.

H) Diameter range from 0.18mm to 6.50mm, thermal class from 130 to 220.

I) Longer quality guarantee period, any quality problem we will compensate for your loss.

Enameled copper wire

1. 130, 155, 180, 200 centigrade

2. 0.05-1.80mm

Features of Xinyu Enameled Copper Wire:

1) Able to bear corona performance

2) Able to bear solvents

3) Able to bear refrigerant

4) Especially suitable for frequency conversion and control of motor winding in:

a) Frequency conversion refrigerators

b) Frequency conversion air conditioner compressor

c) Electromechanical winding

d) Other electrical machinery with the same demands

Main Application of Xinyu Enameled Copper Wire

–Lighting fixtures

–Transformers

–Coils

–Switchgear

–Solenoid valves

–Automobiles

–Electrical appliance

–Industrial electronics

–Pumps & fans motor

Under the the guidance of “Quality First, Customer Uppermost”, Xinyu-enameledwire has made great efforts in technological innovation and market development. Welcome your visit.

torsdag, november 8th, 2018

Xinyu Aluminum Enameled Wire Brief Information

Xinyu-enameledwire was founded in 2002. With good skill, advanced equipment, strict management and hard work of our staff, from established. Our high-quality Enameled aluminum wire get the users’ trust and praise.

Advantages of Aluminum enameled wire :

Excellent thermal stability

Excellent dielectric and mechanical properties

Very good chemical resistance to common solvent and coolants.

Better sliding during coil insertion in slots

High resistance to abrasion

Chemically resistant

Enamelled types and thermal class of Aluminum enameled wire :

1) Polyester enameled aluminum wire, class 130

2) Modified polyester enameled aluminum wire, class 155

3) Polyesterimide enameled aluminum wire, class 180

4) Polyester (imide) coated with polyamide-imide enameled aluminum wire, class 200

5) Polyimide enameled aluminum wire, class 220

Applications of Aluminum Enameled Wire :

a)Small transformers, linear motors, relays, solenoids, small motors, clock coils, watch coils, magnetic heads, instruments,speakers.

b)Automotive sensors and coils as relais and ignition coils.

c)Generators,dry-type or oil-immersed.

d)Anti-explosion motor,air-conditioner compressor,washing machine

e)Military and space applications.

Create professional, Quality Guaranteed, Win customers with Credit is always our mission. Wishing your kind great cooperation!

tirsdag, november 6th, 2018

Enameled Copper Clad Aluminum Wire 180 Synvision Introduction

Xinyu-enameledwire was founded in 2003 year, we specialized at manufacture and export of Enameled Wire . The producuts we supplied as follows:

enameled copper wire;

enameled aluminum wire;

Enameled Copper Clad Aluminum Wire;

Enameled Rectangular Copper Wire;

Enameled Rectangular Aluminum Wire;

Paper-covered Rectangular Copper Wire;

Paper-covered Rectangular Aluminum Wire;

Transformer Aluminum Foil;

Transformer Copper Foil

Xinyu 180 Enameled Copper Clad Aluminum Wire Brief Info

Xinyu 180 Enameled Copper Clad Aluminum Wire has excellent properties of scratch resistance,film adhesion,electrical property,solvent resistance and heat dissipation,widely used in audio coils,deflection coils,degaussing coils,mobile communication equipments.

PRODUCT:Enameled Copper Clad Aluninum Wire

STANDARD:Q/320584 EIW001-2010

DATE: 14th,Jul.,2017

TYPE:CCAQZY-2/180

SIZE:0.900mm

Thanks to our strict quality control system and qualified service team, We have established very friendly and successful business relationships with customers all around the world.

It’s our consistent and sole goal that customers’ satisfactions are always of the first importance. Xinyu-enameledwire.com sincerely welcome customers and friends from all over the world to be hand in hand with us, To develop together, and create the beautiful future together with you.

Want to know more about the enameled wire , please click here to visit our homepage.

onsdag, oktober 31st, 2018

Enameled Aluminum Wire Standard High Adhesion

The characteristics of the Enameled Aluminum Wire determine that a larger wire gauge is required to conduct the same current than the copper wire. Therefore, the main wire gauge of the enamelled round enameled aluminum wire is a 0.7 to 3.5 mm medium and large wire, since the enameled aluminum wire is higher than the copper wire. The line stretch is large and easier to stretch, so the primary requirement for large-size enamelled round aluminum wire is adhesion.

Through a series of experiments and successful experiences, we found that the improvement of the paint film adhesion of large-size aluminum wire can be effectively improved by the following two improvements: the use of a large-scale aluminum wire for bottoming, that is, the use of special self-adhesive paint on the surface of aluminum materials. After the two-step undercoating, the composite PEI, PE and PAI composite coatings were applied. This primer makes a strong connection between aluminum and polyester or polyester imine primer, which greatly improves the adhesion of the paint film.

Compared to the copper oxide layer, the aluminum oxide layer has the advantages of high hardness and good adhesion to the substrate. Therefore, the use of this feature in the process of coating the line in the first line is not painted or modified annealing process deliberately to oxidize the surface of the enameled aluminum wire before painting, this oxide layer is equivalent to the smooth surface of the polished aluminum rod It can effectively improve the adhesion with the film.

Under the pressure of cost, each compressor factory is currently developing enameled aluminum wire air conditioners and refrigerator compressors. However, unlike the mature applications of microwave oven transformers, the working environment of the compressors is more demanding, and at the same time it is required in the design and manufacture of compressors. The high stress embedment and very high groove fill rate all require higher softening breakdown of the enameled wire.

mandag, oktober 29th, 2018

Xinyu 180 Enameled Copper Clad Aluminum Wire Brief Info

Xinyu-enameledwire was founded in 2003 year, we specialized at manufacture and export of Enameled Wire . The producuts we supplied as follows:

Enameled Copper Wire;

Enameled aluminum wire;

Enameled Copper Clad Aluminum Wire;

Enameled Rectangular Copper Wire;

Enameled Rectangular Aluminum Wire;

Paper-covered Rectangular Copper Wire;

Paper-covered Rectangular Aluminum Wire;

Transformer Aluminum Foil;

Transformer Copper Foil

Xinyu 180 Enameled Copper Clad Aluminum Wire Brief Info

Xinyu 180 Enameled Copper Clad Aluminum Wire has excellent properties of scratch resistance,film adhesion,electrical property,solvent resistance and heat dissipation,widely used in audio coils,deflection coils,degaussing coils,mobile communication equipments.

PRODUCT:Enameled Copper Clad Aluninum Wire

STANDARD:Q/320584 EIW001-2010

DATE: 14th,Jul.,2017

TYPE:CCAQZY-2/180

SIZE:0.900mm

Thanks to our strict quality control system and qualified service team, We have established very friendly and successful business relationships with customers all around the world.

It’s our consistent and sole goal that customers’ satisfactions are always of the first importance. Xinyu-enameledwire.com sincerely welcome customers and friends from all over the world to be hand in hand with us, To develop together, and create the beautiful future together with you.

fredag, oktober 26th, 2018

Advantages of Enameled Copper Wire and Xinyu Company

Xinyu-enameledwire is the domestic professional technology experts of Copper Enameled Wire , always adhere to the product first, the principle of winning on quality, and firmly believe that integrity management and word of mouth marketing, paying attention to the customer’s purchase experience.

Advantages of Xinyu Enameled Wire Company:

Xinyu enameled wire company is a leading designer and manufacturer of enameled wire.

Customization

We can arrange production according to customers’ requirements.

Free sample

We supply free wire sample(≤ 2kg) for customer testing.

One-stop solution for transformers

We provide a full set of raw materials for transformer factories

Perfect after-sale service

Compensation solution help customers reduce the loss at lowest.

Advantages Of Xinyu Enameled Copper Wire:

A) Stable quality, high-purity copper conductor adopted.

B) The most competitive price for your market.

C) Professional technology support and timely after-sale service.

D) Free sample available for your test.

E) Special specification can be customized, OEM is also accepted.

F) Fast Delivery, 12-15 days for one 20GP container’s loading.

G) Elantas insulation available.

H) Diameter range from 0.18mm to 6.50mm, thermal class from 130 to 220.

I) Longer quality guarantee period, any quality problem we will compensate for your loss.

Xinyu Enameled Wire with outstanding technical standards, superior product quality, standardized safe operation level, efficient service concept, the best product cost, and good business reputation and other unique advantages, access to the industry customers and experts unanimously recognized and praised. Welcome you to visit our factory.

onsdag, oktober 24th, 2018

Advantages of Xinyu Enameled Copper Wire manufacturer

Established in 2002, Xinyu-enameledwire is an integrated industrial and trade enterprise specialized in Copper Enameled Wire with UL certification.

Goal of Xinyu Enameled Wire Company

Our goal is to provide customized solutions for the market and customers, whether it is a single enameled wire or raw materials integration, as long as the customer needs, we will do our best to do the best.

For any customer advice and feedback, we will give patient and meticulous response and equal treatment.

For any customer inquiries, we will give the most professional and most reasonable offer with fastest speed.

We are grateful for the customer’s complaint, because this is the driving force for our progress.

We are never satisfied with the status quo, and be tireless on the road of innovation and pursuing professional knowledge.

For any order of the customer, we will complete it timely with nice quality and quantity.

Xinyu Enameled Wire Company Advantages

Professional and experienced engineers

On-time service

Product warranty

Many years experience

OEM & ODM welcomed

Xinyu-enameledwire.com all dedicate ourselves to our careers and we are proud of creating value for worldwide customers.

mandag, oktober 22nd, 2018

Applications of Xinyu Thermal Class 130/155/180 Enameled Copper Wire

Xinyu-enameledwire is specialized in manufacturing of Enameled Wire for many years. We also offer OEM and ODM services.

Applications of Xinyu Thermal Class 130/155/180 Enameled Copper Wire:

155 Enameled Copper Clad Aluminum Wire

a) Small transformers, linear motors, relays, solenoids, small motors, clock coils, watch coils,magnetic headsMicrowave transformers;

Windings with light weight, high conductivity, good heat resistance;

Winding used for high frequency signal transmission

Enamelled wire used in small-motor rotor winding .etc.

Magnet wires used in monitor deflection coil;

Magnet wires used in degaussing coil;

Other special magnet wire.

b) Automotive sensors and coils as relais and ignition coils

c) Generators,dry-type or oil-immersed

d) Anti-explosion motor,air-conditioner compressor,washing machine,Magnetic wire used in High Frequency

transformer, common transformer, inductance coils, electromotors, household electromotors and micro-motors;

e) Military and space applications

We are a Copper Enameled Wire factory, and we have our own foreign trade department, we market our own products. We are never satisfied with the status quo, and be tireless on the road of innovation and pursuing professional knowledge.

« Forrige sideNæste side »